| Collets Page 1 |  |
|
| PRODUCT | APPLICATION | CODE TYPE | RANGE |
Taper Collets |
12.2 27.08 |
06-1.000 | |
R8 Collets Extending Collets |
This unit is applicable to all sorts of milling machines, which spindle taper hole is R8, such as X6325 、 X5325 etc. | 1-1.6 16-20 |
06-2.000 |
R8 Emergency collets |
Face and pilot hole are soft can machine any size ao your requirements | 1/1.6 | 06-3.000 06-4.000 06-11.000 |
| R8 Collets Bar |
50.8-128(L) | 06-5.000 | |
5C Collets |
This unit is applicable to all sorts of all sorts of lathes, which spindle taper hole is 5C, such as automatic lathes, CNC lathes, etc. | 1-1.6 16-28 |
06-6.000 |
5C Emergency Collets |
Face and pilot hole are soft can machine any size ao your requirements | 1/16 | 06-7.000 |
| 5C Emergency Collets | Soft head can holding on round and it also can holding on square and hex by pressed | 11.9 54 |
06-8.000 |
Step Collets |
Bady is hardened and precision ground head is soft to permit machining to requirement |
2 6 |
06-9.000 |
| 5C Fixture Mounts |
Can be used in place of face plate fixtures for quickly mounting and dismounting |
2 6 |
06-10.000 |
Sharpener Collet |
HRC40-45 Hardness: clamping part HRC55-60 ， elastic part HRC40-45. | 3 16 |
06-12.000 |
EM18 CollET For Engraving Machine |
If no Special requirement, supply to you according to round hole-II grade, If you require round hole-I ,the price would be advanced | 20 20 |
06-13.000 |
| Feeding Collets | HRC40-45 Hardness: clamping part HRC55-60 ， elastic part HRC40-45. | 14 60 |
06-16.000 |